White Knight tile paint, now allows you to quickly and cheaply change the color and look of your tiles, whether it be in your bathroom, laundry or kitchen.

The process consists of 4 steps.

Step1. Thoroughly clean your tiles with the white knight tile and laminate cleaner. This is basically sugar soap, so you can save a few dollars by using sugar soap, but you may void your warranty if you have adhesion problems. Make sure that once the surface is clean that you wipe it down with clean water and let it dry thoroughly before proceeding to step 2.

Step2. Once the surface is completely dry, you are ready to apply the White Knight tile and laminate primer.

First stir the primer thoroughly. It needs to be warmer than 10 degrees Celsius and cooler than 30 degrees Celsius. Apply with a good quality brush or roller. It will be touch dry in about an hour and you can apply the top coat after 4 hours. If it is on the colder side then allow more drying time before applying the top coat.

Step3. Once the undercoat has dried, you are ready to apply the White Knight Tile Paint. As with the primer it will need to be stirred thoroughly and has the same temperature requirements. It is even more important to use a good quality brush or roller as this will affect your final finish. White Knight Tile Paint can be tinted in a large range of colors. The surface will be touch dry in 2 hours and you can apply your second coat after 6 hours. Remember to allow extra drying time if the temperature is cool.

Step4. Once your top coat is completely dried, you can recreate fresh new white grout lines with the grout pen. The pen also works great for refreshing existing white grout.

Note- give it a good week to cure completely before any harsh scrubbing. The product is not suitable for floor tiles or shower bases. If you would prefer a lower gloss level then you can use the laminate paint instead.

Article originally published at Source by Brett Weston