Laminating paper is the process where you are creating the plastic film over your original document. Your plastic will be heated and then molded around your document in preserving it from the water damage or even scratching. Most of people usually laminate their important documents, pictures or even memorabilia. But there will be the time when you should remove the laminate. It will be the difficult process and also rarely possible without the damage to your original document. Here is more information for you.

For the first step, you can place your document on a mat. After that, light it brightly with a lamp that is shining directly on your document therefore you may properly see your edges and also seams.

For the second step, you can examine your laminated paper. After that, look for the seam where a laminate plastic will meet the document, and create the air pocket.

For the next step, it is important for you to slice your laminate with your utility knife down the layer. You can use a ruler to correctly line a knife up and also keep it in the place away from your document. Then, slice your plastic lamination away.

After that, do not for get to pry your lamination carefully away from you document. You can use your utility knife if you want to create the space between your lamination and also the document.

For the last step, you need to pull your lamination slowly until it has completely removed. It is also important for you to add heat from the heat gun set on the low to soften the laminate, to make it easier for you to remove.

Article originally published at Source by David Y Moore